Do you have questions?

We are happy to assist you!

Please call us on:
+61 1300 888 868

Bürkert - Close to you
Office /6
    • Main Office
      Burkert Contromatic Australia Pty. Limited
      15 Columbia Way
      Norwest Business Park
      Baulkham Hills, NSW 2153

      PO Box 6524
      Baulkham Hills NSW 2153
      Phone +61 1300 888 868
      Fax +61 1300 888 076
      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      South Australia
      Innovation House
      First Avenue
      Mawson Lakes SA 5095

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Perth
      Unit 8, 1st Floor
      85 Reid Promenade
      Joondalup WA 6027

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Brisbane
      Unit 5a, 88 Brandl Street
      Brisbane Technology Park
      Eight Mile Plains QLD 4113

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Melbourne
      Suite 49, UniPark
      Building 4, 195 Wellington Road
      Clayton VIC 3168

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Sydney
      15 Columbia Way
      Norwest Business Park
      Baulkham Hills NSW 2153

      E-Mail fnyrf.nh@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Type 8010 - Inline Paddle Wheel Flow Switch

    Produkt-Foto Typ 8010

    The depiction of the products may differ from the actual specific design.

    • Produkt-Foto Typ 8010
    • Produkt-Foto Typ 8010

    Type Description

    The INLINE flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/ maximum values of flow. The sensor/switch is made up of a fitting (Type S010) and an electronic module (Type SE10), quickly and easily connected together by a Quarter-Turn. This device indicates the presence of a flow in the pipe by switching the Reed contact contained in the electronic module. The switching points Min./Max. for rising and falling velocities can be set with a screw within a defined range. The SE10 electronic module is available in two version: -Normally open (NO): The flow switches on the contact. - Normally closed (NC): The flow switches off the contact. These S010 fittings are available in two versions: - with a short blade «Range1» fitted for the fittings DN15 to 40. - with a long blade „Range2“ fitted for the fittings DN32 to 50.

    • Economic integration in pipe systems without any additional piping
    • Magnetic measuring principle
    • Mechanical adjustment of setpoint

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Downloads

    Data Sheets

    Description
    Filename
    Filesize
    Language / Country
    DTS Flipper Flow Switch DS8010-Standard-US-EN.pdf 249.9 kB EN / US
    DTS Flow Switch DS8010-Standard-EU-EN.pdf 224.5 kB EN / EU
    DTS Détecteur de débit mécanique DS8010-Standard-FR-FR.pdf 214.5 kB FR / FR
    DTS Schalter DS8010-Standard-DE-DE.pdf 223.7 kB DE / DE

    User Manuals

    Description
    Filename
    Filesize
    Language / Country
    MAN Operating Instructions MA8010-Standard-EU-ML.pdf 273.9 kB EN,FR,DE / EU
    MAN Manual de Instrucciones MA8010-Standard-ES-ES.pdf 385.1 kB ES / ES

    Interactive Animation

    Description
    Filename
    Filesize
    Language / Country
    3D_ANIMATION 3D-Animation - 8010 3D-PDF-DE-SD-FRLD16_pdf.pdf 1.8 MB DE
    3D_ANIMATION 3D-Animation - 8010 3D-PDF-EN-SD-FRLD16_pdf.pdf 1.8 MB EN