Do you have questions?

We are happy to assist you!

Please call us on:
+61 1300 888 868

Bürkert - Close to you
Office /6
    • Main Office
      Burkert Contromatic Australia Pty. Limited
      15 Columbia Way
      Norwest Business Park
      Baulkham Hills, NSW 2153

      PO Box 6524
      Baulkham Hills NSW 2153
      Phone +61 1300 888 868
      Fax +61 1300 888 076
      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      South Australia
      Innovation House
      First Avenue
      Mawson Lakes SA 5095

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Perth
      Unit 8, 1st Floor
      85 Reid Promenade
      Joondalup WA 6027

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Brisbane
      Unit 5a, 88 Brandl Street
      Brisbane Technology Park
      Eight Mile Plains QLD 4113

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Melbourne
      Suite 49, UniPark
      Building 4, 195 Wellington Road
      Clayton VIC 3168

      E-Mail fnyrf.nh@ohexreg.pbz
    • Office
      Bürkert Sydney
      15 Columbia Way
      Norwest Business Park
      Baulkham Hills NSW 2153

      E-Mail fnyrf.nh@ohexreg.pbz
  • Main Office
  • Headquarters
  • Systemhaus
  • Distributor
  • Office
  • Plant
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    This type is not available anymore since 30/12/16.

    Please contact us regarding a successor product

    Type 0744 - Direct-acting 3/2 way lifting armature valve

    Produkt-Foto Typ 0744

    The depiction of the products may differ from the actual specific design.

    Type Description

    Type 744 is a direct-acting plunger type solenoid valve, normally closed by spring action (circuit function C), or normally open by spring action (circuit function D). When energized, the solenoid armature is drawn against a spring.The flow path through the valve is dependent up on the chosen circuit function.G 1/4 Single-phase bridge and varistor are housed in a flameproof enclosure to protection classification “d”. Coil and terminal box correspond to protection classification “e”, i.e. increased safety. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.

    • Explosion-protected block-screwed coil
    • Push-over solenoid system
    • Body in brass

    For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

    Downloads

    Data Sheets

    Description
    Filename
    Filesize
    Language / Country
    DTS Solenoid Valve, EEx DS0744-EEx-EU-EN.pdf 70.3 kB EN / EU