Share via email
Some fields are missing
send eMail

Continuous Online Water Quality Monitoring

Water monitoring for a consistently high water quality with Online Analysis System Type 8905

Your Benefits through our Water Quality Monitoring System

  • All measurement data available at a glance thanks to digital interfaces and an easily read display
  • Minimal and predictable maintenance expenditure
  • Accuracy and documentation of measurement data at the highest level

Water, essential to mankind’s survival, is already a scarce resource. With an increasing global population and ever more sources of pollution, the task of providing people with hygienically safe drinking water is becoming more challenging all the time. In order to provide water with this degree of purity, measurement devices are needed that allow for reliable, online analysis of physical, chemical and microbiological parameters.

Sensors that make your water quality measurement manageable

Turbidity

The turbidity of water is related to the undissolved content in water. This parameter is an indicator of aesthetic condition and of possible hidden microbiological content in of the water. The turbidity can increase in the untreated water, e.g. after rainfall events, and thus require further treatment steps. Furthermore, this parameter is used as a limit value monitoring (1,0 FNU) or for monitoring the filter process in the drinking water. The measurement takes place in a water sample on the basis of unresolved particles. Measure turbidity with sensor type MS05.

Free chlorine / chlorine dioxide

Chlor Scheme

 

Free chlorine is used for the disinfection of drinking water or for the oxidation. The measurement serves for the monitoring or control of the disinfectant dosage. Thereby, a high-precision, membrane-covered, amperometric Pt-Pt-sensor measures the free-chlorine concentration of water. The recommended amount of free chlorine ranges from 0,1 to 0,3 mg/L. Our chlorine sensor type MS02 can support you in the measurement.

 
 
 
 

pH value

pH Scheme

 

This value is measured for quality monitoring in untreated or drinking water. Water with a pH value of >7,7 is considered as not corrosive. The pH value also serves for the control and monitoring of treatment processes as, e.g. for the deacidification with lye. The pH measurement is based on the ISFET Technology (ion-sensitive field effect transistor). The pH value is the negative logarithm of hydrogen ions activity in a solution and provides valuable information about the water condition. Measure the pH value of your system with pH sensor type MS01.

 

Conductivity

Conductivity Scheme

 

Conductivity provides information about the undissolved substances (e.g. minerals) in water and serves for ongoing quality monitoring. As an example, conductivity varies when adding de-icing salt. Conductivity describes the water’s ability to conduct electricity. This value is an indicator of the quantity of dissolved substances in a water sample. Our sensor type MS03 can support you in determining the conductivity.

 

 

ORP / Redox potential

ORP Scheme

 

The ORP/redox values determine the water quality, e.g. the contamination of surface waters, or bacterial metabolism. Furthermore, the mechanism of the disinfectant is checked by the ORP value. The oxidation-reduction potential (ORP) is one of the main water parameters. Measure the ORP value of your system with type MS04 - Redox Sensor-Cube.

 

Simple and exact water analysis – a compact measurement & monitoring system

High-resolution 7" touch screen

Intuitive operation and clear visualization.

Simple connection technology

No need for multiple wires and excessive pipework, only one connection for the complete system.

Extensive parameterization

Flexible combination of up to 30 sensor cubes, e.g.: Chlorine, chlorine dioxide, pH, redox potential, conductivity & turbidity

Cleaning System

Fully automated cleaning of the cubes with freely definable cleaning sequences.

Hot-Swap Technology

Plug&Play Sensor cubes. Easy removal for maintenance, even during operation.

Type 8905

Online water analysis system

Type 8905
  • Continuous analysis of drinking water and industrial process water
  • Based on the modular Bürkert cube and backplane technology
  • Fieldbus connection for versatile industrial communication
  • Fieldbus connection for versatile industrial communication, data exchange via mobile gateway
  • Extremely low-maintenance and long service life thanks to MEMS technology

Modularity – suitable for your application

Need for spatial flexibility?

Online-Analyse-System als dezentral montierte Feldeinheit

The distributed solution offers a flexible and application-related measurement possible at any point of the process. The integrated Fieldbus unit communicates with the central SPS, where all parameters are evaluated. The different sensor cubes can be varied depending on the number and type of parameters to be measured.

 

Robust solutions – measurement technology in control cabinet

 

Tailored control cabinets protect your measurement technology against internal influences. The intuitive 7“ display with touch function makes the operation simple and your measured values manageable. Up to 60 sensor cubes can be varied and thus adapt to your measurement challenges. The automatic cleaning units rinse the system automatically after every measurement, which makes a manual intervention unnecessary.

 

Communication

A uniform communication interface makes it possible to network various devices with each other and exchange and manage process or servicing information. With EDIP -Efficient Device Integration Platform- the communication between the devices will be more than simple. With the 8905 Online Analysis System, this networking functions down to the sensor / actuator level. This means that the entire process can be controlled easily and efficiently.

PLC
Fieldbus module ME43 sends values to the higher-level control system (PLC).
Type 3361 control valve adds missing liquids or chemicals to the water.
ME44 I/O is f(x)*-capable and transmits the data of the added dosing quantities to the control valve, directly installed in the online analysis system.
The online analysis system analyses the current values of the water and reports malfunctions.

8905 Online analysis system in practice

Drinking water analysis in the municipal water supply

Learn how the Type 8905 Online Analysis System is proving its worth in drinking water analysis for the Grand Poitiers community.

Further information can be found in our flyer. Download flyer now.